Updated Nov 20, 2026· 8 min read

Key takeaways

  • Compare the best reverse osmosis membranes by GPD rating, salt rejection, size and fit, with replacement picks for standard 1812 home RO systems.

A reverse osmosis system is only as good as its membrane. The thin-film element inside the slim horizontal housing does nearly all of the dissolved-solids removal, and as it ages over two to three years of typical service, flow slows and the TDS reading of the product water creeps upward. Swapping in a fresh element is the single most effective maintenance step for an under-sink RO unit, and it costs far less than replacing the whole system.

This guide compares five replacement membranes sold on Amazon, all built to the standard residential 1812 format used by most five-stage and six-stage under-sink systems. The picks span 50, 75 and 100 GPD ratings from FilmTec, Membrane Solutions, Express Water and Geekpure, so you can match the output and rejection rating your system was designed around instead of guessing at a generic cartridge.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most standard 1812 housings, the FilmTec BW60-1812-75 is the safest like-for-like replacement, with a 75 GPD rating and the highest published stabilized salt rejection of the group. Membrane Solutions covers the budget and mid-range tiers in 75 and 100 GPD sizes, Express Water offers a certified 50 GPD option for smaller systems, and the Geekpure two-pack suits households that maintain more than one unit.

FilmTec BW60-1812-75

FilmTec BW60-1812-75

FilmTec BW60-1812-75

Check price on Amazon

The BW60-1812-75 is DuPont’s current residential FilmTec element and the direct successor to the widely fitted TW30-1812-75. FilmTec sheet is the membrane material many system brands install at the factory, so this element is the closest thing to an original-equipment replacement for a standard housing. DuPont publishes a stabilized salt rejection of 99 percent at standard test conditions, with a stated minimum of 96 percent, which is the strongest rejection documentation in this roundup.

The element is rated at 50 psi rather than the 60 psi some competing brands use for their headline figures, so its 75 GPD output is quoted under gentler conditions. It ships dry, which gives it a long shelf life as a spare, and DuPont states the element is tested and certified by NSF International against NSF/ANSI Standard 58 for material requirements. This is the premium pick for buyers who want the manufacturer’s own published test data behind the rating.

Specs

  • Brand: FilmTec (DuPont)
  • Model: BW60-1812-75, replaces TW30-1812-75
  • Rated output: 75 GPD at 50 psi
  • Stabilized salt rejection: 99 percent published, 96 percent minimum
  • Membrane type: Polyamide thin-film composite
  • Size: 1812 format, fits nominal 2-inch inside-diameter housings
  • Certification: NSF/ANSI 58 for material requirements, per DuPont
  • Tier: Premium

Membrane Solutions 75 GPD RO Membrane

Check price on Amazon

Membrane Solutions builds its residential range around the same universal 1812 dimensions, and the 75 GPD element is the natural mid-range alternative to the FilmTec. The maker lists compatibility with a long roster of factory systems, including APEC, Express Water, Home Master and iSpring models that shipped with a 75 GPD stage-four element, which makes it a straightforward swap when the original brand’s part is hard to source.

The element measures 11.75 by 1.75 inches and fits both 1812 and 2012 style residential housings. Membrane Solutions describes the sheet as a thin-film composite rated for everyday drinking-water duty, and the listing is sold as a single element without a housing, so it drops into the membrane vessel you already own. Choose this one when you want the common 75 GPD rating at a mid-range tier without paying for a name-brand sheet.

Specs

  • Brand: Membrane Solutions
  • Model: ROULP-1812-75
  • Rated output: 75 GPD
  • Membrane type: Thin-film composite
  • Size: 11.75 x 1.75 inches, 1812/2012 housings
  • Listed compatibility: APEC, Express Water, Home Master, iSpring and other standard systems
  • Pack contents: Single membrane element
  • Tier: Mid-range

Membrane Solutions 100 GPD RO Membrane

Check price on Amazon

Stepping up to 100 GPD shortens the time a storage tank takes to refill, which matters in households that draw a lot of RO water for cooking, kettles and ice makers. This Membrane Solutions element keeps the same 11.75 by 1.75 inch footprint as its 75 GPD sibling, so it fits the same standard housings while raising the rated daily output.

Higher-output residential elements generally trade a little rejection for flow, and the maker’s compatibility list again covers the major under-sink brands, including systems originally fitted with a 100 GPD stage. Before choosing any higher-GPD element, check that your system’s flow restrictor matches the new rating, because the restrictor, not the membrane alone, sets the drain-to-product ratio. Pick this element when tank recovery speed is the priority and your hardware supports the rating.

Specs

  • Brand: Membrane Solutions
  • Model: ROULP-2012-100
  • Rated output: 100 GPD
  • Membrane type: Thin-film composite
  • Size: 11.75 x 1.75 inches, standard residential housings
  • Listed compatibility: APEC, Express Water, Home Master, iSpring and other standard systems
  • Pack contents: Single membrane element
  • Tier: Mid-range

Express Water FLTMEME50

Express Water FLTMEME50

Express Water FLTMEME50

Check price on Amazon

Not every system is built around a 75 GPD element. Many compact and older five-stage units shipped with a 50 GPD membrane, and fitting a higher-rated element without changing the flow restrictor can upset the system’s balance. The FLTMEME50 from Express Water is the like-for-like answer for those units, sized at the standard 11.75 by 1.75 inches and rated at 50 GPD.

Express Water lists ANSI and NSF external testing certification for this filter in its product data, and the element is sold as the replacement membrane for the brand’s own under-sink systems as well as a standard-size spare for other housings. Output is modest, so large families may find the tank slow to recover, but for one or two people it matches the design point of a 50 GPD system exactly. This is the budget-tier pick for smaller households running a 50 GPD unit.

Specs

  • Brand: Express Water
  • Model: FLTMEME50
  • Rated output: 50 GPD
  • Membrane type: Thin-film composite
  • Size: 11.75 x 1.75 inches
  • Certification: ANSI and NSF external testing certification, per the listing
  • Listed fit: Express Water under-sink systems and standard 1812 housings
  • Tier: Budget

Geekpure 100 GPD RO Membrane, 2-Pack

Geekpure 100 GPD RO Membrane, 2-Pack

Geekpure 100 GPD RO Membrane, 2-Pack

Check price on Amazon

The Geekpure entry is a two-pack of 100 GPD elements, which suits a different kind of buyer: someone maintaining two RO systems, or a landlord or family member who services several units and wants a spare on the shelf. The elements use the GP-TW-1812-100G format, the maker’s standard residential size, and Geekpure describes them as NSF certificated in the listing title.

Buying two elements at once lowers the per-element cost tier compared with singles, and because dry-stored spare membranes keep well, the second element can wait until the next change is due. The trade-off is that both elements are the same 100 GPD rating, so this pack makes sense only when every system you maintain uses that output class. Verify the current listing before ordering, and treat this as the value pick for multi-system households.

Specs

  • Brand: Geekpure
  • Model: GP-TW-1812-100G
  • Rated output: 100 GPD per element
  • Membrane type: Thin-film composite
  • Size: Standard 1812 residential format
  • Certification: Described as NSF certificated in the listing
  • Pack contents: 2 membrane elements
  • Tier: Mid-range

How to choose

Start with size. Almost every traditional under-sink system with a separate storage tank uses the 1812 element, roughly 11.75 inches long and 1.75 inches in diameter, inside a nominal 2-inch housing. Tankless systems and many countertop units use proprietary cartridges instead, and none of the elements in this guide fit those. If your old element slides out of a slim tube housing, you almost certainly have an 1812 system.

Next, match the GPD rating to the one printed on the old element or in your system manual. The membrane and the flow restrictor are sized as a pair, so moving from 50 to 75 GPD, or from 75 to 100 GPD, without changing the restrictor can waste water or starve the membrane. Staying with the original rating is the safest choice; upgrade only if you also fit the matching restrictor.

Then compare rejection ratings carefully. A rejection figure only means something alongside its test conditions: feed pressure, temperature and feed TDS all change the result. DuPont rates the BW60 at 50 psi, while many brands quote figures at higher pressure, which flatters the output number. A published minimum rejection, like FilmTec’s stated 96 percent floor, is more useful than a best-case headline.

Finally, protect the new element. Thin-film composite membranes are damaged by chlorine, so the carbon pre-filters must be in good condition before the new membrane goes in, and most makers suggest changing pre-filters on schedule and sanitizing the housing during the swap. A TDS meter reading before and after the change confirms the new element is performing: compare the product-water TDS with the tap-water TDS to work out the actual rejection your system achieves.

Who should skip

Skip this roundup if your system is tankless, uses twist-lock proprietary cartridges, or is a countertop unit, because none of these bare 1812 elements will fit. Skip it, too, if your membrane is less than a year old and TDS readings are still close to the figure you measured when it was new; slow flow alone is often a clogged pre-filter or a tired storage tank rather than a failed membrane. And if your feed water comes from a private well with high iron or hardness, deal with pre-treatment first, since a new membrane exposed to untreated well water can foul quickly regardless of brand.

FAQ

How often should an RO membrane be replaced?
Most makers put residential membrane life at two to three years on treated city water when pre-filters are changed on schedule. The practical test is rejection: measure tap and product TDS, and when the membrane is removing noticeably less than it did when new, it is time to replace it.

Can I fit a 100 GPD membrane in a system that came with a 50 GPD element?
The element itself will usually fit the same housing, but the flow restrictor is matched to the original rating. Changing GPD without changing the restrictor can alter the drain ratio and shorten membrane life, so either keep the original rating or swap the restrictor to match.

Why is my new membrane producing water slowly at first?
New elements need a break-in period, and makers generally advise flushing the first tankful or two of product water before drinking. Output also depends heavily on feed pressure and temperature, so a system on cold, low-pressure feed water will always run below the headline GPD rating.

Does a higher rejection rating always mean better water?
Not by itself. Rejection is measured under stated test conditions that differ between brands, and real-world results depend on your pressure, temperature and feed TDS. A membrane with a published minimum rejection and clear test conditions gives you a firmer basis for comparison than a higher headline number with no conditions attached.

Final verdict

For a standard 1812 housing, the FilmTec BW60-1812-75 is the reference replacement: documented rejection, a rating quoted at realistic pressure, and factory-fit confidence. Membrane Solutions covers the same housings at mid-range tiers in both 75 and 100 GPD for buyers who want more flow or a lower-cost element, Express Water’s FLTMEME50 keeps 50 GPD systems running as designed, and the Geekpure two-pack makes sense for households maintaining more than one unit. Whichever you choose, match the GPD rating to your flow restrictor, renew the carbon pre-filters, and confirm the result with a TDS meter.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Reverse Osmosis Membranes: 5 Replacement PicksCheck price on Amazon